Server - IBM System x3550 M3 (İkinci El)

Server - IBM System x3550 M3 (İkinci El)

Not: Ürünleri satın almadan önce lütfen bize mesaj atın  Whatsapp  0 505 212 74 94

300GB 10K SAS Disk

Performance
The x3550 M3 offers numerous features to boost performance and reduce costs:

Up to two 6-core Xeon 5600 series processors offering superior performance. Xeon 5600 series processors offer up to 54% better performance than the previous generation 5500 series processors (workload dependent).

Eighteen DIMMs of registered 1333 MHz DDR3 ECC memory provide speed, high availability, and a memory capacity of up to 288 GB.

High-performance 6 Gbps SAS RAID controllers and 15K RPM 6 Gbps SAS disk drives in a variety of capacities to suit your local storage requirements.

The use of solid-state drives (SSDs) instead of or along with traditional spinning drives (HDDs) can significantly improve I/O performance. An SSD can support 20,000 I/O operations per second (IOPS) whereas a typical HDD handles fewer than 500 IOPS.

Flexibility and scalability
The x3550 M3 has the ability to grow with your application requirements with these features:

Very high density computing in a 1U dual-socket server.

A choice of 4-core or 6-core processors with clock rates from 1.6 GHz to 3.6 GHz.

18 DIMM sockets allowing memory expansion of up to 288 GB.

A choice of power supplies including 460 W, 675 W AC or DC, or energy-efficient 675 W.

Five USB 2.0 ports available - two front, two rear, and one internal for an embedded hypervisor.

Storage bay flexibility: Up to eight hot-swap 2.5" drive bays for SAS or SATA HDDs, or solid-state drives (intermixing supported); or four 2.5" bays plus an internal optical drive bay.

Direct-attach SAS storage with the EXP2512, EXP2524, and EXP3000 storage enclosures is supported. IBM System Storage servers, including network-attached storage (NAS), and iSCSI or Fibre Channel-attached storage, can also be attached.

The x3550 M3 provides two PCI Express (PCIe) 2.0 x16 I/O slots for increased network or storage connectivity.

Manageability and security
Powerful systems management features simplify local and remote management of the x3550 M3:

The x3550 M3 includes an Integrated Management Module (IMM) to monitor server availability, perform Predictive Failure Analysis, and trigger IBM Systems Director alerts.

An optional Virtual Media Key enables additional systems management capabilities, including web-based out-of-band remote control (keyboard video and mouse), remote optical drive support, Windows “blue screen” error capture, and support for LDAP and SSL protocols.

Text Console Redirection support allows the administrator to remotely view x3550 M3 text messages over Serial or LAN connections.

Integrated industry-standard Unified Extensible Firmware Interface (UEFI) next-generation BIOS. New capabilities include:

Human readable event logs — no more beep codes.

Complete out-of-band coverage by the Advance Settings Utility to simplify remote setup.

A complete setup solution, allowing adapter configuration functions to be moved into UEFI.

Integrated Trusted Platform Module (TPM) 1.2 support.

Industry-standard AES NI support for faster, stronger encryption.

Integrated IPMI 2.0 support alerts IBM Systems Director to anomalous environmental factors, such as voltage and thermal conditions. It also supports highly secure remote power control using data encryption.

IBM Systems Director is included for proactive systems management. IBM Systems Director comes with a portfolio of tools, including IBM Systems Director Active Energy Manager, IBM Service and Support Manager, and others. IBM Systems Director also offers extended systems management tools for additional server management and increased availability. When a problem is encountered, IBM Systems Director can issue administrator alerts via email, pager, and other methods.

IBM Systems Director Active Energy Manager provides advanced power management features with actual real-time energy monitoring, reporting, and capping features.

Availability and serviceability
The System x3550 M3 provides many features to simplify serviceability and increase system uptime:

The x3550 M3 servers offer Chipkill ECC memory protection (when using x4 DIMMs). Chipkill memory is up to 16 times better than standard ECC memory at correcting memory errors. This can help reduce downtime caused by memory errors.

The x3550 M3 offers memory mirroring for redundancy in the event of a non-correctable memory failure.

Toolless cover removal provides easy access to upgrades and serviceable parts, such as HDDs and memory. Similarly, the Virtual Media Key and the ServeRAID controller can be installed and replaced without tools. This means less time (and therefore less money) spent servicing the x3550 M3.

The server offers hot-swap and redundant fan modules and power supplies and hot-swap disk drives (redundant when implemented in conjunction with a RAID controller). These features mean greater system uptime.

Toolless slides ship with the server, together with a cable management arm (CMA), that allows the rack server to easily slide into place.

The drop-down light path diagnostics panel and individual light path LEDs quickly lead the technician to failed (or failing) components. This simplifies servicing, speeds up problem resolution, and helps improve system availability.

Solid-state drives (SSDs) offer significantly better reliability than traditional mechanical HDDs for greater uptime.

The three-year (parts and labor) limited onsite warranty provides peace of mind and greater investment protection than a one-year warranty does.

Energy efficiency

The System x3550 M3 has an energy-efficient design with features including the following:

Low-voltage processors draw less energy and produce less waste heat than high-voltage processors, thus helping to reduce data center energy costs. Available 4-core Xeon 5600 series processors use only 40 W and 6-core processors consume as little as 60 W.

Optional solid-state drives (SSDs) use only 2 W of power per drive, compared to 9 - 10 W for 2.5-inch HDDs. This is as much as 80% less power than a 2.5-inch HDD would use, with a corresponding reduction in heat output that further improves the overall bottom line.

Support for 1.35 V low-voltage DDR3 memory DIMMs that consume 20% less energy.

Energy-efficient components, including low-voltage transistors and voltage regulator modules, and power supplies that are up to 90% efficient.

The x3550 M3 uses hexagonal ventilation holes in the chassis. Hexagonal holes can be grouped more densely than round holes, providing more efficient airflow through the system chassis. This ultimately results in reduced operational costs.

An altimeter works in conjunction with the IMM to govern fan rotation based on the readings that it delivers. This saves money under normal conditions because the fans do not have to spin at high speed.

Standard specifications

Table 1. Standard specifications

ComponentsSpecificationForm factor1U Rack.ProcessorUp to two six-core (up to 3.46 GHz) or quad-core (up to 3.6 GHz) Intel Xeon 5600 series processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz memory speed.Memory cacheUp to 12 MB L3.ChipsetIntel 5520.MemoryUp to 18 DIMM sockets (9 DIMMs per processor). Up to 288 GB with 16 GB DDR3 RDIMMs and 18 populated DIMM slots (up to 144 GB with 9 DIMMs per processor), or up to 48 GB with 4 GB DDR3 UDIMMs and 12 populated DIMM slots (up to 24 GB with 6 DIMMs per processor).Memory protectionECC, ChipKill (for x4-based memory DIMMs), Memory Mirroring, and Memory Sparing.Disk drive baysUp to eight 2.5" hot-swap SAS/SATA HDDs or solid-state drives (SSDs).Maximum internal storageUp to 7.2 TB with 900 GB SAS HDDs, or up to 8.0 TB with 1 TB SATA HDDs, or up to 1.6 TB with 200 GB SSDs. Intermix of SAS/SATA/SSD is supported.RAID SupportRAID 0, 1, 1E with ServeRAID-BR10il v2 or M1015; RAID 0, 1, 5, 10, 50 with M5014 or M5015. Optional upgrade to RAID 5 is available for M1015. Optional upgrade to RAID 6, 60 is available for M5014/M5015.Optical drive baysOne with optional Optical Drive Enablement Kit, support for DVD-ROM or Multiburner. If used, the maximum number of HDD bays is limited to 4.Tape drive baysNone.Network interfacesIntegrated 2 Gigabit Ethernet ports, plus 2 ports on optional Gigabit Ethernet with Ethernet Daughter Card (does not consume PCI slot).PCI Expansion slotsUp to 3 slots (up to 2 standard slots are available; one slot is dedicated to RAID controller), dependant on the riser cards used. Standard models have:

Slot 1: PCI Express 2.0 x16, Low-profile

Slot 2: PCI Express 2.0 x16, full-height, half-length

Each slot is implemented using a riser card. Each PCIe riser card can be replaced with a PCI-X riser card offering one PCI-X 64-bit/133 MHz slot.External portsTwo USB 2.0 and one DB-15 video on front. Two USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems management, up to 4 RJ-45 Gigabit Ethernet network ports (2 standard, 2 optional) on rear. One internal USB port for embedded hypervisor.CoolingIBM Calibrated Vectored Cooling™ with 6 counter-rotating hot swap fans with N+1 redundancy. Altimeter is to control fan speed based on atmospheric pressure.Power supplyUp to 2 redundant hot-swap 460 W AC or 675 W AC or 675 W high efficiency (HE) AC power supplies with 90%+ efficiency. 675 W -48 V DC models are available via CTO.Hot-swap componentsHard drives, power supplies, fans.

Systems managementUEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path Diagnostics, Automatic Server Restart, IBM Systems Director* and IBM Systems Director Active Energy Manager™, IBM ServerGuide. Optional Virtual Media Key for remote presence (graphics, keyboard & mouse).Security featuresPower-on password, administrator's password, Trusted Platform Module (TPM).VideoMatrox G200eV with 16 MB memory integrated into the IMM. Maximum resolution is 1280x1024 at 75 Hz with 16M colors.Operating systems supportedMicrosoft Windows Server 2003 and 2003 R2, Microsoft Windows Server 2008 R2 and 2008, Microsoft Windows Server 2012, Red Hat Enterprise Linux 4, 5 and 6, Red Hat Enterprise MRG 1.0/2.0 Realtime, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4/4.1 and VMware ESXi 4/4.1 embedded hypervisor, Sun Solaris 10, VMware vSphere 5/5.1.Limited warrantyThree-year customer replaceable unit and onsite limited warranty with 9x5/next business day (NBD) response time.Service and SupportOptional service upgrades are available through IBM ServicePacs®: 24x7/next business day or 4 hours onsite repair, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software.DimensionsHeight: 43 mm (1.7 in), width: 440 mm (17.3 in), depth: 711 mm (28.0 in)WeightMinimum configuration 12.7 kg (28 lb), maximum configuration 15.9 kg (35.1 lb)

* Effective October 12, 2012, or until supply is depleted, IBM will discontinue the shipment of IBM Systems Director DVDs with IBM System x servers and IBM BladeCenter chassis. IBM Systems Director Express Edition and IBM Systems Director Standard Edition, which include software subscription and support, continue to be available for IBM System x servers and IBM Blade Centers.